Android View 的测量流程详解

软件发布|下载排行|最新软件

当前位置:首页IT学院IT技术

Android View 的测量流程详解

huansky   2019-12-01 我要评论

概述

上一篇 Android DecorView 与 Activity 绑定原理分析 分析了在调用 setContentView 之后,DecorView 是如何与 activity 关联在一起的,最后讲到了 ViewRootImpl 开始绘制的逻辑。本文接着上篇,继续往下讲,开始分析 view 的绘制流程。

上文说到了调用 performTraversals 进行绘制,由于 performTraversals 方法比较长,看一个简化版:

// ViewRootImpl 类
private void performTraversals() {
    // 这个方法代码非常多,但是重点就是执行这三个方法
    // 执行测量
    performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
    // 执行布局(ViewGroup)中才会有
    performLayout(lp, mWidth, mHeight);
    // 执行绘制
    performDraw();
}

其流程具体如下:

 View的整个绘制流程可以分为以下三个阶段:

  • measure: 判断是否需要重新计算 View 的大小,需要的话则计算;

  • layout: 判断是否需要重新计算 View 的位置,需要的话则计算;

  • draw: 判断是否需要重新绘制 View,需要的话则重绘制。

MeasureSpec

在介绍绘制前,先了解下 MeasureSpec。MeasureSpec 封装了父布局传递给子布局的布局要求,它通过一个 32 位 int 类型的值来表示,该值包含了两种信息,高两位表示的是 SpecMode(测量模式),低 30 位表示的是 SpecSize(测量的具体大小)。下面通过注释的方式来分析来类:

/**  
 * 三种SpecMode: 
 * 1.UNSPECIFIED 
 * 父 ViewGroup 没有对子View施加任何约束,子 view 可以是任意大小。这种情况比较少见,主要用于系统内部多次measure的情形,
* 用到的一般都是可以滚动的容器中的子view,比如ListView、GridView、RecyclerView中某些情况下的子view就是这种模式。
* 一般来说,我们不需要关注此模式。  * 2.EXACTLY   * 该 view 必须使用父 ViewGroup 给其指定的尺寸。对应 match_parent 或者具体数值(比如30dp)  * 3.AT_MOST   * 该 View 最大可以取父ViewGroup给其指定的尺寸。对应wrap_content  *    * MeasureSpec使用了二进制去减少对象的分配。   */   public class MeasureSpec {           // 进位大小为2的30次方(int的大小为32位,所以进位30位就是要使用int的最高位和第二高位也就是32和31位做标志位)           private static final int MODE_SHIFT = 30;           // 运算遮罩,0x3为16进制,10进制为3,二进制为11。3向左进位30,就是11 00000000000(11后跟30个0)           // (遮罩的作用是用1标注需要的值,0标注不要的值。因为1与任何数做与运算都得任何数,0与任何数做与运算都得0)           private static final int MODE_MASK  = 0x3 << MODE_SHIFT;           // 0向左进位30,就是00 00000000000(00后跟30个0)           public static final int UNSPECIFIED = 0 << MODE_SHIFT;           // 1向左进位30,就是01 00000000000(01后跟30个0)           public static final int EXACTLY     = 1 << MODE_SHIFT;           // 2向左进位30,就是10 00000000000(10后跟30个0)           public static final int AT_MOST     = 2 << MODE_SHIFT;           /**           * 根据提供的size和mode得到一个详细的测量结果           */           // 第一个return:         // measureSpec = size + mode;   (注意:二进制的加法,不是十进制的加法!)           // 这里设计的目的就是使用一个32位的二进制数,32和31位代表了mode的值,后30位代表size的值           // 例如size=100(4),mode=AT_MOST,则measureSpec=100+10000...00=10000..00100           //          // 第二个return:         // size &; ~MODE_MASK就是取size 的后30位,mode &amp; MODE_MASK就是取mode的前两位,最后执行或运算,得出来的数字,前面2位包含代表mode,后面30位代表size         public static int makeMeasureSpec(int size, int mode) {               if (sUseBrokenMakeMeasureSpec) {                 return size + mode;             } else {                 return (size & ~MODE_MASK) | (mode &  MODE_MASK);             }         }           /**           * 获得SpecMode          */           // mode = measureSpec &amp; MODE_MASK;           // MODE_MASK = 11 00000000000(11后跟30个0),原理是用MODE_MASK后30位的0替换掉measureSpec后30位中的1,再保留32和31位的mode值。           // 例如10 00..00100 & 11 00..00(11后跟30个0) = 10 00..00(AT_MOST),这样就得到了mode的值           public static int getMode(int measureSpec) {               return (measureSpec & MODE_MASK);           }           /**           * 获得SpecSize           */           // size = measureSpec &  ~MODE_MASK;           // 原理同上,不过这次是将MODE_MASK取反,也就是变成了00 111111(00后跟30个1),将32,31替换成0也就是去掉mode,保留后30位的size           public static int getSize(int measureSpec) {               return (measureSpec &  ~MODE_MASK);           }   }  

顺便提下 MATCH_PARENT 和 WRAP_CONTENT 这两个代表的值,分别是 -1 和 -2。

       /**
         * Special value for the height or width requested by a View.
         * MATCH_PARENT means that the view wants to be as big as its parent,
         * minus the parent's padding, if any. Introduced in API Level 8.
         */
        public static final int MATCH_PARENT = -1;

        /**
         * Special value for the height or width requested by a View.
         * WRAP_CONTENT means that the view wants to be just large enough to fit
         * its own internal content, taking its own padding into account.
         */
        public static final int WRAP_CONTENT = -2;

Decorview 尺寸的确定

在 performTraversals 中,首先是要确定 DecorView 的尺寸。只有当 DecorView 尺寸确定了,其子 View 才可以知道自己能有多大。具体是如何去确定的,可以看下面的代码:

//Activity窗口的宽度和高度
int desiredWindowWidth;
int desiredWindowHeight;
...
//用来保存窗口宽度和高度,来自于全局变量mWinFrame,这个mWinFrame保存了窗口最新尺寸
Rect frame = mWinFrame;
//构造方法里mFirst赋值为true,意思是第一次执行遍历吗    
if (mFirst) {
    //是否需要重绘
    mFullRedrawNeeded = true;
    //是否需要重新确定Layout
    mLayoutRequested = true;
    
    // 这里又包含两种情况:是否包括状态栏
    
    //判断要绘制的窗口是否包含状态栏,有就去掉,然后确定要绘制的Decorview的高度和宽度
    if (shouldUseDisplaySize(lp)) {
        // NOTE -- system code, won't try to do compat mode.
        Point size = new Point();
        mDisplay.getRealSize(size);
        desiredWindowWidth = size.x;
        desiredWindowHeight = size.y;
    } else {
        //宽度和高度为整个屏幕的值
        Configuration config = mContext.getResources().getConfiguration();
        desiredWindowWidth = dipToPx(config.screenWidthDp);
        desiredWindowHeight = dipToPx(config.screenHeightDp);
    }
    ...
 else{
    
        // 这是window的长和宽改变了的情况,需要对改变的进行数据记录
    
        //如果不是第一次进来这个方法,它的当前宽度和高度就从之前的mWinFrame获取
        desiredWindowWidth = frame.width();
        desiredWindowHeight = frame.height();
        /**
         * mWidth和mHeight是由WindowManagerService服务计算出的窗口大小,
         * 如果这次测量的窗口大小与这两个值不同,说明WMS单方面改变了窗口的尺寸
         */
        if (desiredWindowWidth != mWidth || desiredWindowHeight != mHeight) {
            if (DEBUG_ORIENTATION) Log.v(mTag, "View " + host + " resized to: " + frame);
            //需要进行完整的重绘以适应新的窗口尺寸
            mFullRedrawNeeded = true;
            //需要对控件树进行重新布局
            mLayoutRequested = true;
            //window窗口大小改变
            windowSizeMayChange = true;
        }
 }
    ...
    // 进行预测量
    if (layoutRequested){
        ...
        if (mFirst) {
            // 视图窗口当前是否处于触摸模式。
            mAttachInfo.mInTouchMode = !mAddedTouchMode;
            //确保这个Window的触摸模式已经被设置
            ensureTouchModeLocally(mAddedTouchMode);
        } else {
            //六个if语句,判断insects值和上一次比有什么变化,不同的话就改变insetsChanged
            //insects值包括了一些屏幕需要预留的区域、记录一些被遮挡的区域等信息
            if (!mPendingOverscanInsets.equals(mAttachInfo.mOverscanInsets)) {
                    insetsChanged = true;
            }
            ...
            
          //  这里有一种情况,我们在写dialog时,会手动添加布局,当设定宽高为Wrap_content时,会把屏幕的宽高进行赋值,给出尽量长的宽度
            
            /**
             * 如果当前窗口的根布局的width或height被指定为 WRAP_CONTENT 时,
             * 比如Dialog,那我们还是给它尽量大的长宽,这里是将屏幕长宽赋值给它
             */
            if (lp.width == ViewGroup.LayoutParams.WRAP_CONTENT
                    || lp.height == ViewGroup.LayoutParams.WRAP_CONTENT) {
                windowSizeMayChange = true;
                //判断要绘制的窗口是否包含状态栏,有就去掉,然后确定要绘制的Decorview的高度和宽度
                if (shouldUseDisplaySize(lp)) {
                    // NOTE -- system code, won't try to do compat mode.
                    Point size = new Point();
                    mDisplay.getRealSize(size);
                    desiredWindowWidth = size.x;
                    desiredWindowHeight = size.y;
                } else {
                    Configuration config = res.getConfiguration();
                    desiredWindowWidth = dipToPx(config.screenWidthDp);
                    desiredWindowHeight = dipToPx(config.screenHeightDp);
                }
            }
        }
    }
}

这里主要是分两步走:

  1. 如果是第一次测量,那么根据是否有状态栏,来确定是直接使用屏幕的高度,还是真正的显示区高度。

  2. 如果不是第一次,那么从 mWinFrame 获取,并和之前保存的长宽高进行比较,不相等的话就需要重新测量确定高度。

当确定了 DecorView 的具体尺寸之后,然后就会调用 measureHierarchy 来确定其 MeasureSpec :

 // Ask host how big it wants to be
  windowSizeMayChange |= measureHierarchy(host, lp, res,
        desiredWindowWidth, desiredWindowHeight); 

其中 host 就是 DecorView,lp 是 wm 在添加时候传给 DecorView 的,最后两个就是刚刚确定显示宽高 ,看下方法的具体逻辑 :

    private boolean measureHierarchy(final View host, final WindowManager.LayoutParams lp,
            final Resources res, final int desiredWindowWidth, final int desiredWindowHeight) {
        int childWidthMeasureSpec;
        int childHeightMeasureSpec;
        boolean windowSizeMayChange = false;boolean goodMeasure = false;
     // 说明是 dialog if (lp.width == ViewGroup.LayoutParams.WRAP_CONTENT) { // On large screens, we don't want to allow dialogs to just // stretch to fill the entire width of the screen to display // one line of text. First try doing the layout at a smaller // size to see if it will fit. final DisplayMetrics packageMetrics = res.getDisplayMetrics(); res.getValue(com.android.internal.R.dimen.config_prefDialogWidth, mTmpValue, true); int baseSize = 0;
       // 获取一个基本的尺寸 if (mTmpValue.type == TypedValue.TYPE_DIMENSION) { baseSize = (int)mTmpValue.getDimension(packageMetrics); } if (DEBUG_DIALOG) Log.v(mTag, "Window " + mView + ": baseSize=" + baseSize + ", desiredWindowWidth=" + desiredWindowWidth);
       // 如果大于基本尺寸 if (baseSize != 0 && desiredWindowWidth > baseSize) { childWidthMeasureSpec = getRootMeasureSpec(baseSize, lp.width); childHeightMeasureSpec = getRootMeasureSpec(desiredWindowHeight, lp.height); performMeasure(childWidthMeasureSpec, childHeightMeasureSpec); if (DEBUG_DIALOG) Log.v(mTag, "Window " + mView + ": measured (" + host.getMeasuredWidth() + "," + host.getMeasuredHeight() + ") from width spec: " + MeasureSpec.toString(childWidthMeasureSpec) + " and height spec: " + MeasureSpec.toString(childHeightMeasureSpec));
          // 判断测量是否准确 if ((host.getMeasuredWidthAndState()&View.MEASURED_STATE_TOO_SMALL) == 0) { goodMeasure = true; } else { // Didn't fit in that size... try expanding a bit. baseSize = (baseSize+desiredWindowWidth)/2; if (DEBUG_DIALOG) Log.v(mTag, "Window " + mView + ": next baseSize=" + baseSize); childWidthMeasureSpec = getRootMeasureSpec(baseSize, lp.width); performMeasure(childWidthMeasureSpec, childHeightMeasureSpec); if (DEBUG_DIALOG) Log.v(mTag, "Window " + mView + ": measured (" + host.getMeasuredWidth() + "," + host.getMeasuredHeight() + ")"); if ((host.getMeasuredWidthAndState()&View.MEASURED_STATE_TOO_SMALL) == 0) { if (DEBUG_DIALOG) Log.v(mTag, "Good!"); goodMeasure = true; } } } }      // 这里就是一般 DecorView 会走的逻辑 if (!goodMeasure) { childWidthMeasureSpec = getRootMeasureSpec(desiredWindowWidth, lp.width); childHeightMeasureSpec = getRootMeasureSpec(desiredWindowHeight, lp.height); performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
       // 与之前的尺寸进行对比,看看是否相等,不想等,说明尺寸可能发生了变化 if (mWidth != host.getMeasuredWidth() || mHeight != host.getMeasuredHeight()) { windowSizeMayChange = true; } } return windowSizeMayChange; }

上面主要主要做的就是来确定父 View 的 MeasureSpec。但是分了两种不同类型:

  • 如果宽是 WRAP_CONTENT 类型,说明这是 dialog,会有一些针对 dialog 的处理,最终会调用 performMeasure 进行测量;

  • 对于一般 Activity 的尺寸,会调用  getRootMeasureSpec MeasureSpec 。

下面看下 DecorView MeasureSpec 的计算方法:

    private static int getRootMeasureSpec(int windowSize, int rootDimension) {
        int measureSpec;
        switch (rootDimension) {

        case ViewGroup.LayoutParams.MATCH_PARENT:
            // Window can't resize. Force root view to be windowSize.
            measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.EXACTLY);
            break;
        case ViewGroup.LayoutParams.WRAP_CONTENT:
            // Window can resize. Set max size for root view.
            measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.AT_MOST);
            break;
        default:
            // Window wants to be an exact size. Force root view to be that size.
            measureSpec = MeasureSpec.makeMeasureSpec(rootDimension, MeasureSpec.EXACTLY);
            break;
        }
        return measureSpec;
    }

 该方法主要是根据 View 的 MeasureSpec 是根据宽高的参数来划分的。

  • MATCH_PARENT :精确模式,大小就是窗口的大小;

  • WRAP_CONTENT :最大模式,大小不定,但是不能超过窗口的大小;

  • 固定大小:精确模式,大小就是指定的具体宽高,比如100dp。

对于 DecorView 来说就是走第一个 case,到这里 DecorView 的 MeasureSpec 就确定了,从 MeasureSpec 可以得出 DecorView 的宽高的约束信息。

获取子 view 的 MeasureSpec

当父 ViewGroup 对子 View 进行测量时,会调用 View 类的 measure 方法,这是一个 final 方法,无法被重写。ViewGroup 会传入自己的 widthMeasureSpec 和  heightMeasureSpec,分别表示父 View 对子 View 的宽度和高度的一些限制条件。尤其是当 ViewGroup 是 WRAP_CONTENT 的时候,需要优先测量子 View,只有子 View 宽高确定,ViewGroup 才能确定自己到底需要多大的宽高。

当 DecorView 的 MeasureSpec 确定以后,ViewRootImpl 内部会调用 performMeasure 方法:

  private void performMeasure(int childWidthMeasureSpec, int childHeightMeasureSpec) {
        if (mView == null) {
            return;
        }
        Trace.traceBegin(Trace.TRACE_TAG_VIEW, "measure");
        try {
            mView.measure(childWidthMeasureSpec, childHeightMeasureSpec);
        } finally {
            Trace.traceEnd(Trace.TRACE_TAG_VIEW);
        }
    }

该方法传入的是对 DecorView 的 MeasureSpec,其中 mView 就是 DecorView 的实例,接下来看 measure() 的具体逻辑:

/**
 * 调用这个方法来算出一个View应该为多大。参数为父View对其宽高的约束信息。
 * 实际的测量工作在onMeasure()方法中进行
 */
public final void measure(int widthMeasureSpec, int heightMeasureSpec) {
  ......
  // Suppress sign extension for the low bytes
   long key = (long) widthMeasureSpec << 32 | (long) heightMeasureSpec & 0xffffffffL;
   if (mMeasureCache == null) mMeasureCache = new LongSparseLongArray(2);
// 若mPrivateFlags中包含PFLAG_FORCE_LAYOUT标记,则强制重新布局
  // 比如调用View.requestLayout()会在mPrivateFlags中加入此标记
  final boolean forceLayout = (mPrivateFlags & PFLAG_FORCE_LAYOUT) == PFLAG_FORCE_LAYOUT;
  final boolean specChanged = widthMeasureSpec != mOldWidthMeasureSpec
      || heightMeasureSpec != mOldHeightMeasureSpec;
  final boolean isSpecExactly = MeasureSpec.getMode(widthMeasureSpec) == MeasureSpec.EXACTLY
      && MeasureSpec.getMode(heightMeasureSpec) == MeasureSpec.EXACTLY;
  final boolean matchesSpecSize = getMeasuredWidth() == MeasureSpec.getSize(widthMeasureSpec)
      && getMeasuredHeight() == MeasureSpec.getSize(heightMeasureSpec);
  final boolean needsLayout = specChanged
      && (sAlwaysRemeasureExactly || !isSpecExactly || !matchesSpecSize);

  // 需要重新布局  
  if (forceLayout || needsLayout) {
    // first clears the measured dimension flag 标记为未测量状态
mPrivateFlags &= ~PFLAG_MEASURED_DIMENSION_SET;
  // 对阿拉伯语、希伯来语等从右到左书写、布局的语言进行特殊处理
resolveRtlPropertiesIfNeeded();
// 先尝试从缓从中获取,若forceLayout为true或是缓存中不存在或是
    // 忽略缓存,则调用onMeasure()重新进行测量工作
    int cacheIndex = forceLayout ? -1 : mMeasureCache.indexOfKey(key);
    if (cacheIndex < 0 || sIgnoreMeasureCache) {
      // measure ourselves, this should set the measured dimension flag back
      onMeasure(widthMeasureSpec, heightMeasureSpec);
      . . .
    } else {
      // 缓存命中,直接从缓存中取值即可,不必再测量
      long value = mMeasureCache.valueAt(cacheIndex);
      // Casting a long to int drops the high 32 bits, no mask needed
      setMeasuredDimensionRaw((int) (value >> 32), (int) value);
mPrivateFlags3 |= PFLAG3_MEASURE_NEEDED_BEFORE_LAYOUT;
    }
   // 如果自定义的View重写了onMeasure方法,但是没有调用setMeasuredDimension()方法就会在这里抛出错误;
   // flag not set, setMeasuredDimension() was not invoked, we raise
   // an exception to warn the developer
   if ((mPrivateFlags & PFLAG_MEASURED_DIMENSION_SET) != PFLAG_MEASURED_DIMENSION_SET) {
   throw new IllegalStateException("View with id " + getId() + ": "
  + getClass().getName() + "#onMeasure() did not set the"
  + " measured dimension by calling"
  + " setMeasuredDimension()");
   }

 

      //到了这里,View已经测量完了并且将测量的结果保存在View的mMeasuredWidth和mMeasuredHeight中,将标志位置为可以layout的状态

 

   mPrivateFlags |= PFLAG_LAYOUT_REQUIRED;
  }
  mOldWidthMeasureSpec = widthMeasureSpec;
  mOldHeightMeasureSpec = heightMeasureSpec;
// 保存到缓存中 mMeasureCache.put(key, ((long) mMeasuredWidth) << 32 | (long) mMeasuredHeight & 0xffffffffL); // suppress sign extension }

 这里要注意的是,这是一个 final 方法,不能被继承。这个方法只在 View 类里面。总结一下 measure() 都干了什么事:

  • 调用 View.measure()方法时 View 并不是立即就去测量,而是先判断一下要不要进行测量操作,如果没必要,那么 View 就不需要重新测量了,避免浪费时间资源

  • 如果需要测量,在测量之前,会先判断是否存在缓存,存在直接从缓存中获取就可以了,再调用一下 setMeasuredDimensionRaw 方法,将从缓存中读到的测量结果保存到成员变量 mMeasuredWidth 和 mMeasuredHeight 中。

  • 如果不能从 mMeasureCache 中读到缓存过的测量结果,调用 onMeasure() 方法去完成实际的测量工作,并且将尺寸限制条件 widthMeasureSpec 和 heightMeasureSpec 传递给 onMeasure() 方法。关于 onMeasure() 方法,会在下面详细介绍。

  • 将结果保存到 mMeasuredWidth 和 mMeasuredHeight 这两个成员变量中,同时缓存到成员变量 mMeasureCache 中,以便下次执行 measure() 方法时能够从其中读取缓存值。

  • 需要说明的是,View 有一个成员变量 mPrivateFlags,用以保存 View 的各种状态位,在测量开始前,会将其设置为未测量状态,在测量完成后会将其设置为已测量状态。

DecorView 是 FrameLayout 子类,这时候应该去看 FrameLayout 中的 onMeasure() 方法,代码具体如下:

 protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
     // 获取子view的个数 int count = getChildCount(); final boolean measureMatchParentChildren = MeasureSpec.getMode(widthMeasureSpec) != MeasureSpec.EXACTLY || MeasureSpec.getMode(heightMeasureSpec) != MeasureSpec.EXACTLY; mMatchParentChildren.clear(); int maxHeight = 0; int maxWidth = 0; int childState = 0; for (int i = 0; i < count; i++) { final View child = getChildAt(i);
       // mMeasureAllChildren 默认为FALSE,表示是否全部子 view 都要测量,子view不为GONE就要测量 if (mMeasureAllChildren || child.getVisibility() != GONE) {
// 测量子view measureChildWithMargins(child, widthMeasureSpec, 0, heightMeasureSpec, 0);
// 获取子view的布局参数 final LayoutParams lp = (LayoutParams) child.getLayoutParams();
// 记录子view的最大宽度和高度 maxWidth = Math.max(maxWidth, child.getMeasuredWidth() + lp.leftMargin + lp.rightMargin); maxHeight = Math.max(maxHeight, child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin); childState = combineMeasuredStates(childState, child.getMeasuredState());
// 记录所有跟父布局有着相同宽或高的子view if (measureMatchParentChildren) { if (lp.width == LayoutParams.MATCH_PARENT || lp.height == LayoutParams.MATCH_PARENT) { mMatchParentChildren.add(child); } } } } // Account for padding too 子view的最大宽高计算出来后,还要加上父View自身的padding maxWidth += getPaddingLeftWithForeground() + getPaddingRightWithForeground(); maxHeight += getPaddingTopWithForeground() + getPaddingBottomWithForeground(); // Check against our minimum height and width maxHeight = Math.max(maxHeight, getSuggestedMinimumHeight()); maxWidth = Math.max(maxWidth, getSuggestedMinimumWidth()); // Check against our foreground's minimum height and width final Drawable drawable = getForeground(); if (drawable != null) { maxHeight = Math.max(maxHeight, drawable.getMinimumHeight()); maxWidth = Math.max(maxWidth, drawable.getMinimumWidth()); }      // 确定父 view 的宽高 setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState), resolveSizeAndState(maxHeight, heightMeasureSpec, childState << MEASURED_HEIGHT_STATE_SHIFT)); count = mMatchParentChildren.size(); if (count > 1) { for (int i = 0; i < count; i++) { final View child = mMatchParentChildren.get(i); final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams(); final int childWidthMeasureSpec;
          // 如果子view的宽是MATCH_PARENT,那么宽度 = 父view的宽 - 父Padding - 子Margin if (lp.width == LayoutParams.MATCH_PARENT) { final int width = Math.max(0, getMeasuredWidth() - getPaddingLeftWithForeground() - getPaddingRightWithForeground() - lp.leftMargin - lp.rightMargin); childWidthMeasureSpec = MeasureSpec.makeMeasureSpec( width, MeasureSpec.EXACTLY); } else { childWidthMeasureSpec = getChildMeasureSpec(widthMeasureSpec, getPaddingLeftWithForeground() + getPaddingRightWithForeground() + lp.leftMargin + lp.rightMargin, lp.width); } final int childHeightMeasureSpec;
          // 同理 if (lp.height == LayoutParams.MATCH_PARENT) { final int height = Math.max(0, getMeasuredHeight() - getPaddingTopWithForeground() - getPaddingBottomWithForeground() - lp.topMargin - lp.bottomMargin); childHeightMeasureSpec = MeasureSpec.makeMeasureSpec( height, MeasureSpec.EXACTLY); } else { childHeightMeasureSpec = getChildMeasureSpec(heightMeasureSpec, getPaddingTopWithForeground() + getPaddingBottomWithForeground() + lp.topMargin + lp.bottomMargin, lp.height); } child.measure(childWidthMeasureSpec, childHeightMeasureSpec); } } }

FrameLayout 是 ViewGroup 的子类,后者有一个 View[] 类型的成员变量 mChildren,代表了其子 View 集合。通过 getChildAt(i) 能获取指定索引处的子 View,通过 getChildCount() 可以获得子 View 的总数。

在上面的源码中,首先调用 measureChildWithMargins() 方法对所有子 View 进行了一遍测量,并计算出所有子View的最大宽度和最大高度。而后将得到的最大高度和宽度加上padding,这里的padding包括了父View的padding和前景区域的padding。然后会检查是否设置了最小宽高,并与其比较,将两者中较大的设为最终的最大宽高。最后,若设置了前景图像,我们还要检查前景图像的最小宽高。

经过了以上一系列步骤后,我们就得到了 maxHeight 和 maxWidth 的最终值,表示当前容器 View 用这个尺寸就能够正常显示其所有子View(同时考虑了 padding 和 margin )。而后我们需要调用 resolveSizeAndState() 方法来结合传来的 MeasureSpec 来获取最终的测量宽高,并保存到 mMeasuredWidth 与 mMeasuredHeight 成员变量中。

如果存在一些子 View 的宽或高是 MATCH_PARENT,那么需要等父 View 的尺寸计算出来后,再来决定这些子 view 的宽高。

下面看看 measureChildWithMargins() 方法具体逻辑:

/**
     * Ask one of the children of this view to measure itself, taking into
     * account both the MeasureSpec requirements for this view and its padding
     * and margins. The child must have MarginLayoutParams The heavy lifting is
     * done in getChildMeasureSpec.
     *
     * @param child The child to measure
     * @param parentWidthMeasureSpec The width requirements for this view
     * @param widthUsed Extra space that has been used up by the parent
     *        horizontally (possibly by other children of the parent)
     * @param parentHeightMeasureSpec The height requirements for this view
     * @param heightUsed Extra space that has been used up by the parent
     *        vertically (possibly by other children of the parent)
     */
    protected void measureChildWithMargins(View child,
            int parentWidthMeasureSpec, int widthUsed,
            int parentHeightMeasureSpec, int heightUsed) {
        final MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();

        final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
                mPaddingLeft + mPaddingRight + lp.leftMargin + lp.rightMargin
                        + widthUsed, lp.width);
        final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
                mPaddingTop + mPaddingBottom + lp.topMargin + lp.bottomMargin
                        + heightUsed, lp.height);

        child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
    }

 该方法主要是获取子 view 的 MeasureSpec,然后调用 child.measure() 来完成子 View 的测量。下面看看子 View 获取 MeasureSpec 的具体逻辑:

 public static int getChildMeasureSpec(int spec, int padding, int childDimension) {
// 父 view 的 mode 和 size int specMode = MeasureSpec.getMode(spec); int specSize = MeasureSpec.getSize(spec);      // 去掉 padding int size = Math.max(0, specSize - padding); int resultSize = 0; int resultMode = 0; switch (specMode) { // Parent has imposed an exact size on us case MeasureSpec.EXACTLY: if (childDimension >= 0) { resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size. So be it. resultSize = size; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be // bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } break; // Parent has imposed a maximum size on us case MeasureSpec.AT_MOST: if (childDimension >= 0) { // Child wants a specific size... so be it resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size, but our size is not fixed. // Constrain child to not be bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size. It can't be // bigger than us. resultSize = size; resultMode = MeasureSpec.AT_MOST; } break; // Parent asked to see how big we want to be case MeasureSpec.UNSPECIFIED: if (childDimension >= 0) { // Child wants a specific size... let him have it resultSize = childDimension; resultMode = MeasureSpec.EXACTLY; } else if (childDimension == LayoutParams.MATCH_PARENT) { // Child wants to be our size... find out how big it should // be resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size; resultMode = MeasureSpec.UNSPECIFIED; } else if (childDimension == LayoutParams.WRAP_CONTENT) { // Child wants to determine its own size.... find out how // big it should be resultSize = View.sUseZeroUnspecifiedMeasureSpec ? 0 : size; resultMode = MeasureSpec.UNSPECIFIED; } break; } //noinspection ResourceType return MeasureSpec.makeMeasureSpec(resultSize, resultMode); }

 方法清楚展示了普通 View 的 MeasureSpec 的创建规则,每个 View 的 MeasureSpec 状态量由其直接父 View 的 MeasureSpec 和 View 自身的属性 LayoutParams (LayoutParams 有宽高尺寸值等信息)共同决定。

从上面的代码可以知道,返回 View 的 MeasureSpec 大致可以分为一下机制情况:
  • 子 View 为具体的宽/高,那么 View 的 MeasureSpec 都为 LayoutParams 中大小。

  • 子 View 为 match_parent,父元素为精度模式(EXACTLY),那么 View 的 MeasureSpec 也是精准模式他的大小不会超过父容器的剩余空间。

  • 子 View 为 wrap_content,不管父元素是精准模式还是最大化模式(AT_MOST),View 的 MeasureSpec 总是为最大化模式并且大小不超过父容器的剩余空间。

  • 父容器为 UNSPECIFIED 模式主要用于系统多次 Measure 的情形,一般我们不需要关心。

总结为下表:

 View.measure()  代码逻辑前面已经分析过了,最终会调用 onMeasuere 方法,下面看下 View.onMeasuere() 的代码:

 protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec),
                getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec));
    }

上面方法中调用了 方法中调用了 setMeasuredDimension()方法,setMeasuredDimension()又调用了 getDefaultSize() 方法。getDefaultSize() 又调用了getSuggestedMinimumWidth()和 getSuggestedMinimumHeight(),那反向研究一下,先看下 getSuggestedMinimumWidth() 方法  (getSuggestedMinimumHeight() 原理 getSuggestedMinimumWidth() 跟一样)。 

 protected int getSuggestedMinimumWidth() {
        return (mBackground == null) ? mMinWidth : max(mMinWidth, mBackground.getMinimumWidth());
    }

 源码很简单,如果 View 没有背景,就直接返回 View 本身的最小宽度 mMinWidth;如果给 View 设置了背景,就取 View 本身的最小宽度 mMinWidth 和背景的最小宽度的最大值.

那么 mMinWidth 是哪里来的?搜索下源码就可以知道,View 的最小宽度 mMinWidth 可以有两种方式进行设置:

  • 第一种是在 View 的构造方法中进行赋值的,View 通过读取 XML 文件中View设置的 minWidth 属性来为 mMinWidth 赋值:
case R.styleable.View_minWidth:
     mMinWidth = a.getDimensionPixelSize(attr, 0);
     break;
  •  第二种是在调用 View 的 setMinimumWidth 方法为 mMinWidth 赋值
public void setMinimumWidth(int minWidth) {
    mMinWidth = minWidth;
    requestLayout();
}

 下面看下 getDefaultSize() 的代码逻辑:

    public static int getDefaultSize(int size, int measureSpec) {
        int result = size;
        int specMode = MeasureSpec.getMode(measureSpec);
        int specSize = MeasureSpec.getSize(measureSpec);

        switch (specMode) {
        case MeasureSpec.UNSPECIFIED:
            result = size;
            break;
        case MeasureSpec.AT_MOST:
        case MeasureSpec.EXACTLY:
            result = specSize;
            break;
        }
        return result;
    }

从注释可以看出,getDefaultSize()这个测量方法并没有适配 wrap_content 这一种布局模式,只是简单地将 wrap_content 跟 match_parent 等同起来。

到了这里,我们要注意一个问题:

getDefaultSize()方法中 wrap_content 和 match_parent 属性的效果是一样的,而该方法是 View 的 onMeasure()中默认调用的,也就是说,对于一个直接继承自 View 的自定义 View 来说,它的 wrap_content 和 match_parent 属性是一样的效果,因此如果要实现自定义 View 的 wrap_content,则要重写 onMeasure() 方法,对 wrap_content 属性进行处理。

如何处理呢?也很简单,代码如下所示:

protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec){
  super.onMeasure(widthMeasureSpec, heightMeasureSpec);
  //取得父ViewGroup指定的宽高测量模式和尺寸
  int widthSpecMode = MeasureSpec.getMode(widthMeasureSpec);
  int widthSpecSize = MeasureSpec.getSize(widthMeasureSpec);
  int heightSpecMode = MeasureSpec.getMode(heightMeasureSpec);
  int heightSpecSize = MeasureSpec.getSize(heightMeasureSpec);
  if (widthSpecMode == MeasureSpec.AT_MOST && heightSpecMode == MeasureSpec.AT_MOST) {
    //如果宽高都是AT_MOST的话,即都是wrap_content布局模式,就用View自己想要的宽高值
        setMeasuredDimension(mWidth, mHeight);
  }else if (widthSpecMode == MeasureSpec.AT_MOST) {
    //如果只有宽度都是AT_MOST的话,即只有宽度是wrap_content布局模式,宽度就用View自己想要的宽度值,高度就用父ViewGroup指定的高度值
        setMeasuredDimension(mWidth, heightSpecSize);
  }else if (heightSpecMode == MeasureSpec.AT_MOST) {
    //如果只有高度都是AT_MOST的话,即只有高度是wrap_content布局模式,高度就用View自己想要的宽度值,宽度就用父ViewGroup指定的高度值
        setMeasuredDimension(widthSpecSize, mHeight);
  }
}

 在上面的代码中,我们要给 View 指定一个默认的内部宽/高(mWidth 和 mHeight),并在 wrap_content 时设置此宽/高即可。最后将在将宽高设置到 View 上:

    // View    
    protected final void setMeasuredDimension(int measuredWidth, int measuredHeight) {
        boolean optical = isLayoutModeOptical(this);
        if (optical != isLayoutModeOptical(mParent)) {
            Insets insets = getOpticalInsets();
            int opticalWidth  = insets.left + insets.right;
            int opticalHeight = insets.top  + insets.bottom;
 
            measuredWidth  += optical ? opticalWidth  : -opticalWidth;
            measuredHeight += optical ? opticalHeight : -opticalHeight;
        }
        setMeasuredDimensionRaw(measuredWidth, measuredHeight);
    }

    private void setMeasuredDimensionRaw(int measuredWidth, int measuredHeight) {
        mMeasuredWidth = measuredWidth;
        mMeasuredHeight = measuredHeight;
        mPrivateFlags |= PFLAG_MEASURED_DIMENSION_SET;
    }

这里就是把测量完的宽高值赋值给 mMeasuredWidthmMeasuredHeight 这两个 View 的属性,然后将标志位置为已测量状态。

子 View 测量完成以后,会计算 childState,看下 combineMeasuredStates 方法 :

public static int combineMeasuredStates(int curState, int newState) {
        return curState | newState;
    }

 当前 curState 为 0, newState 是调用 child.getMeasuredState() 方法得到的,来看下这个方法的具体逻辑:

 /**
     * Return only the state bits of {@link #getMeasuredWidthAndState()}
     * and {@link #getMeasuredHeightAndState()}, combined into one integer.
     * The width component is in the regular bits {@link #MEASURED_STATE_MASK}
     * and the height component is at the shifted bits
     * {@link #MEASURED_HEIGHT_STATE_SHIFT}>>{@link #MEASURED_STATE_MASK}.
     */
    public final int getMeasuredState() {
        return (mMeasuredWidth&MEASURED_STATE_MASK)
                | ((mMeasuredHeight>>MEASURED_HEIGHT_STATE_SHIFT)
                        & (MEASURED_STATE_MASK>>MEASURED_HEIGHT_STATE_SHIFT));
    }

 该方法返回一个 int 值,该值同时包含宽度的 state 以及高度的 state 信息,不包含任何的尺寸信息。

  • MEASURED_STATE_MASK 的值为 0xff000000,其高字节的 8 位全部为 1,低字节的 24 位全部为 0。

  • MEASURED_HEIGHT_STATE_SHIFT 值为 16。

  • 将 MEASURED_STATE_MASK 与 mMeasuredWidth 做与操作之后就取出了存储在宽度首字节中的 state 信息,过滤掉低位三个字节的尺寸信息。

  • 由于 int 有四个字节,首字节已经存了宽度的 state 信息,那么高度的 state 信息就不能存在首位字节。MEASURED_STATE_MASK 向右移 16 位,变成了 0x0000ff00,这个值与高度值 mMeasuredHeight 做与操作就取出了 mMeasuredHeight 第三个字节中的信息。而 mMeasuredHeight 的 state 信息是存在首字节中,所以也得对mMeasuredHeight 向右移相同的位置,这样就把 state 信息移到了第三个字节中。

  • 最后,将得到的宽度 state 与高度 state 按位或操作,这样就拼接成一个 int 值,该值首个字节存储宽度的 state 信息,第三个字节存储高度的 state 信息。

这些都得到之后,就可以开始去计算父 View 的尺寸了:

        // 确定父 View 的宽高
        setMeasuredDimension(resolveSizeAndState(maxWidth, widthMeasureSpec, childState),
                resolveSizeAndState(maxHeight, heightMeasureSpec,
                        childState << MEASURED_HEIGHT_STATE_SHIFT));

 下面开始看 resolveSizeAndState 具体逻辑:

// View 的静态方法
public static int resolveSizeAndState(int size, int measureSpec, int childMeasuredState) {
        final int specMode = MeasureSpec.getMode(measureSpec);
        final int specSize = MeasureSpec.getSize(measureSpec);
        final int result;
        switch (specMode) {
            case MeasureSpec.AT_MOST:
                if (specSize < size) {
                    result = specSize | MEASURED_STATE_TOO_SMALL;
                } else {
                    result = size;
                }
                break;
            case MeasureSpec.EXACTLY:
                result = specSize;
                break;
            case MeasureSpec.UNSPECIFIED:
            default:
                result = size;
        }
        return result | (childMeasuredState & MEASURED_STATE_MASK);
    }

这个方法的代码结构跟前文提到的 getDefaultSize()方法很相似,主要的区别在于 specMode 为 AT_MOST 的情况。我们当时说 getDefaultSize() 方法是没有适配wrap_content 这种情况,而这个 resolveSizeAndState() 方法是已经适配了 wrap_content 的布局方式,那具体怎么实现 AT_MOST 测量逻辑的呢?有两种情况:

  • 当父 ViewGroup 指定的最大尺寸比 View 想要的尺寸还要小时,会给这个父 ViewGroup  的指定的最大值 specSize 加入一个尺寸太小的标志  MEASURED_STATE_TOO_SMALL,然后将这个带有标志的尺寸返回,父 ViewGroup 通过该标志就可以知道分配给 View 的空间太小了,在窗口协商测量的时候会根据这个标志位来做窗口大小的决策。

  • 当父 ViewGroup 指定的最大尺寸比没有比 View 想要的尺寸小时(相等或者 View 想要的尺寸更小),直接取 View 想要的尺寸,然后返回该尺寸。

getDefaultSize() 方法只是 onMeasure() 方法中获取最终尺寸的默认实现,其返回的信息比 resolveSizeAndState() 要少,那么什么时候才会调用 resolveSizeAndState() 方法呢? 主要有两种情况:

  • Android 中的大部分 ViewGroup 类都调用了 resolveSizeAndState() 方法,比如 LinearLayout 在测量过程中会调用 resolveSizeAndState() 方法而非 getDefaultSize()方法。

  • 我们自己在实现自定义的 View 或 ViewGroup 时,我们可以重写 onMeasure() 方法,并在该方法内调用 resolveSizeAndState() 方法。

到此,终于把 View 测量过程讲完了。

下一篇开始讲 View 的 layout 和 draw 过程。

 

参考文章

Android源码完全解析——View的Measure过程

View的绘制流程 

Copyright 2022 版权所有 软件发布 访问手机版

声明:所有软件和文章来自软件开发商或者作者 如有异议 请与本站联系 联系我们