1.概述
列表是python的基本数据类型之一，是一个可变的数据类型，用[]方括号表示，每一项元素使用逗号隔开，可以装大量的数据
#先来看看list列表的源码写了什么，方法:按ctrl+鼠标左键点list
class list(object):
"""
list() -> new empty list
list(iterable) -> new list initialized from iterable's items
"""
def append(self, p_object): # real signature unknown; restored from __doc__
""" L.append(object) -- append object to end """
pass
def count(self, value): # real signature unknown; restored from __doc__
""" L.count(value) -> integer -- return number of occurrences of value """
return 0
def extend(self, iterable): # real signature unknown; restored from __doc__
""" L.extend(iterable) -- extend list by appending elements from the iterable """
pass
def index(self, value, start=None, stop=None): # real signature unknown; restored from __doc__
"""
L.index(value, [start, [stop]]) -> integer -- return first index of value.
Raises ValueError if the value is not present.
"""
return 0
def insert(self, index, p_object): # real signature unknown; restored from __doc__
""" L.insert(index, object) -- insert object before index """
pass
def pop(self, index=None): # real signature unknown; restored from __doc__
"""
L.pop([index]) -> item -- remove and return item at index (default last).
Raises IndexError if list is empty or index is out of range.
"""
pass
def remove(self, value): # real signature unknown; restored from __doc__
"""
L.remove(value) -- remove first occurrence of value.
Raises ValueError if the value is not present.
"""
pass
def reverse(self): # real signature unknown; restored from __doc__
""" L.reverse() -- reverse *IN PLACE* """
pass
def sort(self, cmp=None, key=None, reverse=False): # real signature unknown; restored from __doc__
"""
L.sort(cmp=None, key=None, reverse=False) -- stable sort *IN PLACE*;
cmp(x, y) -> -1, 0, 1
"""
pass
def __add__(self, y): # real signature unknown; restored from __doc__
""" x.__add__(y) <==> x+y """
pass
def __contains__(self, y): # real signature unknown; restored from __doc__
""" x.__contains__(y) <==> y in x """
pass
def __delitem__(self, y): # real signature unknown; restored from __doc__
""" x.__delitem__(y) <==> del x[y] """
pass
def __delslice__(self, i, j): # real signature unknown; restored from __doc__
"""
x.__delslice__(i, j) <==> del x[i:j]
Use of negative indices is not supported.
"""
pass
def __eq__(self, y): # real signature unknown; restored from __doc__
""" x.__eq__(y) <==> x==y """
pass
def __getattribute__(self, name): # real signature unknown; restored from __doc__
""" x.__getattribute__('name') <==> x.name """
pass
def __getitem__(self, y): # real signature unknown; restored from __doc__
""" x.__getitem__(y) <==> x[y] """
pass
def __getslice__(self, i, j): # real signature unknown; restored from __doc__
"""
x.__getslice__(i, j) <==> x[i:j]
Use of negative indices is not supported.
"""
pass
def __ge__(self, y): # real signature unknown; restored from __doc__
""" x.__ge__(y) <==> x>=y """
pass
def __gt__(self, y): # real signature unknown; restored from __doc__
""" x.__gt__(y) <==> x>y """
pass
def __iadd__(self, y): # real signature unknown; restored from __doc__
""" x.__iadd__(y) <==> x+=y """
pass
def __imul__(self, y): # real signature unknown; restored from __doc__
""" x.__imul__(y) <==> x*=y """
pass
def __init__(self, seq=()): # known special case of list.__init__
"""
list() -> new empty list
list(iterable) -> new list initialized from iterable's items
# (copied from class doc)
"""
pass
def __iter__(self): # real signature unknown; restored from __doc__
""" x.__iter__() <==> iter(x) """
pass
def __len__(self): # real signature unknown; restored from __doc__
""" x.__len__() <==> len(x) """
pass
def __le__(self, y): # real signature unknown; restored from __doc__
""" x.__le__(y) <==> x<=y """
pass
def __lt__(self, y): # real signature unknown; restored from __doc__
""" x.__lt__(y) <==> x<y """
pass
def __mul__(self, n): # real signature unknown; restored from __doc__
""" x.__mul__(n) <==> x*n """
pass
@staticmethod # known case of __new__
def __new__(S, *more): # real signature unknown; restored from __doc__
""" T.__new__(S, ...) -> a new object with type S, a subtype of T """
pass
def __ne__(self, y): # real signature unknown; restored from __doc__
""" x.__ne__(y) <==> x!=y """
pass
def __repr__(self): # real signature unknown; restored from __doc__
""" x.__repr__() <==> repr(x) """
pass
def __reversed__(self): # real signature unknown; restored from __doc__
""" L.__reversed__() -- return a reverse iterator over the list """
pass
def __rmul__(self, n): # real signature unknown; restored from __doc__
""" x.__rmul__(n) <==> n*x """
pass
def __setitem__(self, i, y): # real signature unknown; restored from __doc__
""" x.__setitem__(i, y) <==> x[i]=y """
pass
def __setslice__(self, i, j, y): # real signature unknown; restored from __doc__
"""
x.__setslice__(i, j, y) <==> x[i:j]=y
Use of negative indices is not supported.
"""
pass
def __sizeof__(self): # real signature unknown; restored from __doc__
""" L.__sizeof__() -- size of L in memory, in bytes """
pass
__hash__ = None
list
2.列表的索引和切片
#列表和字符串一样拥有索引和切片
#索引：下标从0开始
lst = ["赵四","刘能","谢大脚","谢腾飞","小蒙"] print(lst[0]) #获取第一个元素 #赵四 print(lst[1]) #刘能 print(lst[2]) #谢大脚 print(lst[3][2]) #飞 #索引下标从0开始，3就是谢腾飞，2就是在谢腾飞中切012，就是飞 print(lst[-2]) #负就是从后面切，从-1开始，-2就是谢腾飞
#切片
lst = ["赵四","刘能","谢大脚","谢腾飞","小蒙"] print(lst[1:4]) #['刘能','谢大脚','谢腾飞'] #列表和字符串一样，顾头不顾尾，不能切到4print(lst[-3:-1]) #['谢大脚', '谢腾飞'],顾头不顾尾所以不能切到小蒙print(lst[1::2]) #['刘能', '谢腾飞'] #从1开始到结束，每隔2个输出一个print(lst[-1:-5:-2]) #['小蒙', '谢大脚'] #-1到-5，但是顾头不顾尾就不能切到-5，-2就是从右往前切，每隔2个输出一个
3.列表的增删改查
#注意点：列表和str是不一样的，list可以发生改变，所以直接就在原来的对象上进行了操作
#例如：
lst = ["蒋小鱼","张冲","鲁炎","展大鹏"]
lst.append("阿甘")
print(lst) #['蒋小鱼', '张冲', '鲁炎', '展大鹏', '阿甘']
#3.1增加
#关键字 #append() 在后面追加 #insert() 指定位置添加 #extend() 迭代添加，也就是一个一个添加
#例子：
lst = ["蒋小鱼","张冲","鲁炎","展大鹏"]
lst.append("阿甘")
print(lst) #['蒋小鱼', '张冲', '鲁炎', '展大鹏', '阿甘']
lst.insert(2,"项羽") #在鲁炎的位置插入项羽，之前的元素相应的往后移
print(lst) #['蒋小鱼', '张冲', '项羽', '鲁炎', '展大鹏', '阿甘']
#如果使用字符串添加的话那么就是迭代一个一个添加
lst.extend("巴朗") #['蒋小鱼', '张冲', '鲁炎', '展大鹏', '巴', '朗']
#如果使用列表方式添加，那么就是一个元素
lst.extend(["巴朗"]) #['蒋小鱼', '张冲', '鲁炎', '展大鹏', '巴朗']
print(lst)
#应用：交互输入员工信息，然后按Q退出，再打印输入的信息出来
# lst=[]
# while 1:
# content = input("请输入员工的信息,输入Q退出:")
# if content.upper() == 'Q':
# break
# lst.append(content)
# print(lst)
#3.2.删除
#pop() #指定位置删除 #remove() #删除元素 #clear() #清空列表 #del() #切片删除
#例子：
lst = ["蒋小鱼","张冲","鲁炎","展大鹏"]
lst.pop() #不指定位置，默认删除最后一个
print(lst) #['蒋小鱼', '张冲', '鲁炎']
el = lst.pop(2) #删除2号元素
print(el) #可以查看有没有删除
#鲁炎
print(lst) #再返回列表查看有没有删了
# ['蒋小鱼', '张冲', '展大鹏']
lst.remove("张冲") #指定删除的元素
print(lst) #['蒋小鱼', '鲁炎', '展大鹏']
lst.remove("张三") #如果删除不存在的元素就会报错
print(lst) #报错
lst.clear() #清空
print(lst)
del lst[1:3] #切片删除，因为顾头不顾尾所以删除1和2
print(lst) #['蒋小鱼', '展大鹏']
#3.3.修改
# 1、索引修改 # 2、切片修改
#例子：
lst = ["蒋小鱼","张冲","鲁炎","展大鹏","黑脸"] lst[1] = "乌云" #将1号元素修改成乌云，也就是张冲改成乌云 print(lst) #['蒋小鱼', '乌云', '鲁炎', '展大鹏'] #切片：要注意后面的步长和元素的个数如果不对应的话就会报错 lst[1:4:3] = ["龙大队"] print(lst) #['蒋小鱼', '龙大队', '鲁炎', '展大鹏', '黑脸'] # lst[1:4:3] = ["龙大队","张三"] #这样就会报错，因为步长是3，上面只能切到一个，但是修改了两个，不对应，所以就会报错 # print(lst) lst[1:4] = ["大佬"] #将下标1-3替换成大佬 #如果切片没有步长或者步长是1，则不用关心个数 print(lst) #['蒋小鱼', '大佬', '黑脸']
#3.4.查询
#列表是一个可迭代对象，所以可以进行for循环
lst = ["张三","李四","王五","李六"]
for el in lst:
print(el)
4.列表的嵌套
#采用降维操作，一层一层的看， #就像洋葱一样，一层一层的拨开你的心
#例子：
lst = [1,"张三","蒋小鱼",["鲁炎","张冲",3,["黑脸","龙大队","xiaotian",4],],"乌云"]
#找到张冲
print(lst[3][1]) #张冲
#是按照从下标0开始找，3首先是找到第二个列表，然后再在第二个列表里面找到1张冲
#找到黑脸和龙大队
print(lst[3][3][0:2]) #['黑脸', '龙大队']
#也是按照一层一层的找，记住是顾头不顾尾的
#将xiaotian拿到，然后首字母大写，再扔回去
s = lst[3][3][2]
s = s.capitalize()
lst[3][3][2] = s
print(lst) #[1, '张三', '蒋小鱼', ['鲁炎', '张冲', 3, ['黑脸', '龙大队', 'Xiaotian', 4]], '乌云']
#简写
# lst[3][3][2] = lst[3][3][2].capitalize()
# print(lst)
#将蒋小鱼替换成参谋长
s = lst[2]
s = s.replace("蒋小鱼","参谋长")
lst[2] = s
print(lst) #[1, '张三', '参谋长', ['鲁炎', '张冲', 3, ['黑脸', '龙大队', 'Xiaotian', 4]], '乌云']
#简写
# lst[2] = lst[2].replace("蒋小鱼","参谋长")
# print(lst)
5.列表的相关操作
#count() #查询出现的次数 #sort() #排序，默认升序 #len() #列表的长度
#例子：
lst = ["蒋小鱼","张冲","鲁炎","展大鹏","黑脸","蒋小鱼"]
c = lst.count("蒋小鱼") #查询蒋小鱼出现的次数
print(c) #2
lst.reverse() #反向打印
print(lst) #['蒋小鱼', '黑脸', '展大鹏', '鲁炎', '张冲', '蒋小鱼']
l = len(lst) #计算列表的长度
print(l) #6
#排序,默认升序
lst = [1,2,3,44,11]
lst.sort()
print(lst) #[1, 2, 3, 11, 44]
#降序
lst = [1,2,3,44,11]
lst.sort(reverse=True)
print(lst) #[44, 11, 3, 2, 1]
#循环删除的坑点
######循环删除列表中的每一个元素（有坑）####
#方法：1.可以使用clear()清空，
# 2.使用另外一种方法，循环删
#首先来个坑，删不掉的
lst = [11,22,33,44,55]
for e in lst:
lst.remove(e)
print(lst) #[22, 44]
#直接使用remove是删除不了的，因为删除的时候内部的索引在改变
# 当index=0的时候删除0的字符，当index=1的时候就向下移动了一位，但是列表里面的元素已经往前移填充了
# 所以当删除11，22就变成了第0个索引，当下次删除的时候就是删除第一个索引33，然后就漏掉了22，后面同样
#方法
#1.首先需要记录删除的东西
#2.然后循环要删除的列表，删除真正的列表
#例子：删除性张的
lst = ["张冲","张国荣","张曼玉","蒋小鱼"]
zhangs = [] #首先记录性张
for el in lst:
zhangs.append(el) #将之前的列表追加到zhangs里面
for e in zhangs:
lst.remove(e) #再删除原列表
print(lst) #[]
print(zhangs) #['张冲', '张国荣', '张曼玉', '蒋小鱼']
