参考:https://www.cnblogs.com/flying607/p/8459397.html
文章使用springboot版本:2.0.4.RELEASE springcloud版本Finchley.SR1
需要引入下面三个依赖:
compile('org.springframework.cloud:spring-cloud-starter-config') compile('org.springframework.boot:spring-boot-starter-actuator') compile('org.springframework.boot:spring-boot-starter-web')
(1)spring-cloud-starter-config是为了实现刷新配置
(2)spring-boot-starter-actuator是为了暴露修改/刷新配置的接口
(3)spring-boot-starter-web是为了可以访问暴露的修改/刷新配置的接口
application.properties
#使用端口9999 server.port=9999 #暴露接口 management.endpoints.web.exposure.include=env,refresh
(1)env接口,可以获取配置(GET),也可以修改配置(POST)
(2)refresh接口,可以刷新配置(POST),使得@RefreshScope标注的value可以重新注入。
在需要实时刷新配置的地方加上@RefreshScope注解
访问localhost:9999/actuator/env(GET),可以获得此时的配置
访问localhost:9999/actuator/env(POST)
{ "name":"somekey", "value":"newvalue" }
如上可以把配置中somekey对应的值改为newvalue
不调用刷新接口,直接获取注入的配置值,发现还是旧的值
访问localhost:9999/actuator/refresh(POST)刷新配置
重新获取注入的配置值,发现是新的值
本篇文章就到这里了,希望能够给你带来帮助,也希望您能够多多关注的更多内容!